KRON SERIESGloss
Clear gloss. More material.
A 219 μm clear film for those choosing increased material thickness.
- Gloss finish
- 219 μm nominal thickness
- PolyCore™ PCDL
MATERIAL WARRANTY ↗
KRON / PAINT PROTECTION FILM
Protection. Perfected.
Four series. One philosophy.
CLEAR / SATIN / PRECUTTINGVerify your KRON ↗
FIND YOUR FINISH
Four series.
One KRON standard.
Choose clear gloss, a satin finish or a film built for precutting. Open any series to explore its construction and specifications.
SCROLL TO EXPLORE
MATERIAL WARRANTY ↗
KRON SERIESGloss
Clear gloss. Everyday balance.
A 190 μm clear film balancing material thickness and professional installation flexibility.
- Gloss finish
- 190 μm nominal thickness
- PolyCore™ PCDL
MATERIAL WARRANTY ↗
KRON SERIESGloss
Clear film. Built for precutting.
A removable blue cap helps installers see and organize cut patterns. The installed film is transparent.
- Gloss finish
- 215 μm nominal thickness
- BlueCut™ protective cap
MATERIAL WARRANTY ↗
KRON SERIESSatin
Satin finish. A different look.
A protective film for a satin appearance rather than a gloss finish.
- Satin finish
- 192 μm nominal thickness
- SatinCore™ · 24 GU
MATERIAL WARRANTY ↗
Limited material warranty: KORE and PRIME 6 years, TRACE 4 years, STEALTH 5 years. Registration, eligibility and exclusions apply. View the full warranty terms ↗
Full technical specifications
Declared values from KRON TDS 2.0. Test methods and units vary; gloss percent and gloss units are not interchangeable. Not specified means this revision does not provide a value.
Swipe sideways to compare all four series.
| Declared property | KORE | PRIME | TRACE | STEALTH |
|---|---|---|---|---|
| Nominal film thickness | 190 μm | 219 μm | 215 μm | 192 μm |
| Self-healing / functional topcoat | 13 μm | 13 μm | 15 μm | 13 μm |
| TPU core | 153 μm PCDL TPU | 180 μm PCDL TPU | 180 μm conventional TPU | 153 μm aliphatic TPU |
| Acrylic adhesive | 26 μm | 26 μm | 20 μm | 26 μm |
| Removable blue upper cap | Not specified | Not specified | 60 μm | Not specified |
| Release liner | Not specified | Not specified | 75 μm | Not specified |
| Gloss | >90 GU | >90 GU | >93% | 24 GU |
| Haze | Not specified | Not specified | ≤1.5% | Not specified |
| Ultimate strength | >16 MPa | >19 MPa | >16 MPa | >16 MPa |
| Elongation | >284% | >315% | >280% | >314% |
| Heat aging / aging | ΔE <2 | ΔE <2 | ΔE <2 (aging) | ΔE <2 |
| Xenon accelerated aging | ΔE <2; >80% gloss retention | 3000 h test condition in current TDS | Not specified | Not specified |
| Chemical / stain resistance | Pass / no detrimental effect | Pass (chemical resistance) | Not specified | Not specified |
| Shelf life | 2 years | 2 years | 2 years | 2 years |
TDS 2.0 declares a 190 μm nominal film and component thicknesses of 13 + 153 + 26 μm, which total 192 μm. Both declarations are retained pending clarification. Cap and liner are separate from nominal installed PPF thickness. Shelf life is separate from warranty duration.
ORIGINAL KRON / PRODUCT CHECK
Check inside.
Verify your roll.
Find the QR label inside the roll core. Scan it and enter the six-digit Unique Serial Number.
Missing label or mismatched details? Contact KRON before installation.
ORIGINAL PRODUCT
- ROLL ID
- KR-TR-26-••••••
SCAN TO VERIFY & REGISTER WARRANTY
Unique Serial Number••••••
kron-films.comFROM THE WORKSHOP TO YOUR WARRANTY
Installed.
Registered. Yours.
Your authorized installer records the vehicle and covered areas, then gives you a Warranty ID and personal certificate.
- 01
Original roll
The installer checks and records the roll serial.
- 02
Your installation
The vehicle and installed areas are registered.
- 03
Your certificate
Keep your personal link or PDF and Warranty ID.
THE AUTHORIZED KRON NETWORK
Find your KRON installer.
Explore the map. Find a studio. Protect your vehicle.
Location is optional. Location & privacy ↗
Loading authorized centres…
City-centre pins are approximate. Contact the studio to confirm its location. Use two fingers to move the map.